NAMC-8569-CPU
- NXP Freescale PowerQUICC III MPC8569 processor
- Lattice ECP3 FPGA
- 2x GbE, USB/RS232, and optional user defined I/O towards front panel
- 2x GbE, SRIO, and PCIe towards backplane
- TDM and iTDM support
NAMC-8569-8E1/T1
- NXP Freescale PowerQUICC III MPC8569 processor
- e500 PowerPC
- DS26518 framer for 8x E1/T1 line interfaces via RJ45 towards front panel
- 2x GbE, SRIO, and PCIe towards backplane
- TDM and iTDM support
NAT-AMC-ARRIA10-FMC
- Choice of Intel ARRIA 10 GX or SX SoC
- Dual-core ARM Cortex A9
- Single High Pin Count FMC slot, VITA 57.1 compliant
- Access to FMC front panel interfaces
- Wide range of backplane interconnects
NAT-AMC-PMC
- Atmel AVR1284P Microncontroller
- PLX PEX8112 PCIe-to-PCI bridge for connection between AMC and PMC
- 1x PCIe towards backplane
- Selectable PCIe reference clock via AMC FCLKA or local oscillator
- Compatible to a rich variety of available PMC modules
NAMC-xE1
- Lattice ECP3 FPGA providing TSI and TDM-to-iTDM converter
- Maxim/Dallas DS26518 E1/T1 framer
- 8x or 16x E1/T1 interfaces towards the front panel
- 2x GbE towards backplane at base region
- 2x GbE, 2x SRIO, or 1x PCIe towards backplane at fat-pipe region
NAT-JSM
- Testing and diagnostic for MTCA systems
- Operation in AMC-, MCH-, or dedicated JSM-slot
- Configuration via web interface or front panel elements
NPCIe-UPLINK-O
- PCIe interface card for operation in PCs / servers
- Optical PCIe Gen3 x8/x16 uplink(s) towards front panel
- Transparent to PCIe host => no special driver required
- SSC isolation support
- PCIe hot-plug functionality
NAT-AMC-SDH
- Xilinx Kintex-7 FPGA with optional interfaces, e.g. SDH, TSI, iTDM, HDLC, etc.
- Add/Drop Multiplexer PMC TEMUX336
- Four SFP connectors for 4x OC-3/STM-1 or 2x OC-12/STM-4 SFP transceivers towards front panel
- 4x GbE, XAUI or SRIO (optional), ESSI towards backplane
- iTDM via Gigabit Ethernet
NAT-AMC-COMex
- Supports Type 6 and Type 7 COMex modules
- M.2 PCIe x4 Interface for storage
- Onboard Intel i350 Ethernet Controller with multiple interfaces
- 1G (COMex Type 6) or 1G/10G (COMex Type 7) towards front panel (via SFP) and backplane
- Graphical interface via DDI at the front panel (COMex Type 6 only)
NAT-AMC-ZYNQUP-ECAT
- Xilinx ZynqUP MPSoC with integrated ARM Cortex-A53/-R5 cores and programmable logic
- Scalable number of EtherCAT slaves in MTCA
- 1x SFP as GPIO of FPGA (LVDS or single-ended I/O) at front panel
- 8x 100Mbit Ethernet via RJ45 to EtherCAT network at front panel
- GbE, PCIe x1, and TCLKA-D towards the backplane
NAT-AMC-ZYNQUP-FMC
- Quad-core ARM Cortex-A53 (application processing unit)
- Dual-core ARM Cortex-R5 (real-time processing unit)
- Single High Pin Count FMC slot, VITA 57.1 compliant
- Access to FMC front panel interfaces
- Wide range of backplane interconnects
NAT-AMC-ZYNQUP-SDR
- Combination of NAT-AMC-ZYNQUP-FMC carrier and 1x or 2x
- NAT-FMC-SDR
- mezzanines
- Up to 4x Analog Devices ADRV9009 dual RF transmitters, receivers, and observation receivers
- Xilinx ZynqUP+ FPGA SoC with quad-core ARM Cortex-53 and dual-core Cortex-R5
- Various customizable memory options and numerous interfaces towards front panel and backplane
- Development platform in ready-to-deploy package with optional housing
NAT-FMC-PoE
- 4x IEEE 802.3af compatible RJ45 front ports
- High-efficient power conversion
- VITA 57.1 FMC high pin count (HPC) connector
- 4x SGMII and I²C at the FMC connector
NAT-FMC-SDR4
- 2x Analog Devices ADRV9009 dual RF transmitters, receivers, and observation receivers
- 4x Rx/Tx channels with large bandwidth
- Synchronizable for creating large phased-arrays
- Multiboard synchronization
- VITA 57.1 FMC high pin count (HPC) connector
NAT-XMC-4E1
- Xilinx Spartan-7 XC7S50 FPGA
- Maxim/Dallas DS26518 E1/T1 framer
- Broadcom/PLX PEX 8112 PCIe-to-PCI bridge
- 64 MB SPI flash and 512 MB DDR3 DRAM
- Xilinx Vivado Lab Edition software
NAT-PCIe-XMC-4E1
- Xilinx Spartan-7 XC7S50 FPGA
- Maxim/Dallas DS26518 E1 / T1 framer
- Broadcom/PLX PEX 8112 PCIe-to-PCI bridge
- 64 MB SPI flash and 512 MB DDR3 DRAM
- Standard height, half-length PCI Express x8 add-in card
NAT-PCIe-8E1T1
- Xilinx Spartan-7 FPGA
- Maxim Dallas DS26518 E1 / T1 framer
- Diodes Incorporated PI7C9X112SL PCIe-to-PCI bridge
- 8x E1 via RJ45 towards front panel
- Standard height, half-length PCIe x1 add-in card
