AMD Embedded Computing Summit (Sep 29)
Being an Gold Member of the AMD Partner Program, NAT is participating in the AMD Embedding Computing Summit (ECS) event in Krakow Poland on September 29th, 2026.
At ECS Krakow, 2026, NAT will showcase a live demo demo on drone localization and control. The live demo is based NAT's high-performance adaptive and scalable Software Defined Radio (SDR) and utilizes its eCPRI IP core for AMD Zynq™ Ultrascale+ SoC FPGAs .
In case you cannot make it to our booth during the event, please reach out to us and schedule your personal online appointment with either Niklas Laufkoetter or Heiko Koerte.
We are looking forward to seeing you on-site at the AMD Embedding Computing Summit event in Krakow.
About eCPRI (Enhanced Common Public Radio Interface)
eCPRI (Enhanced Common Public Radio Interface) is a packet-based fronthaul communication protocol used in 5G and Open RAN (O-RAN) networks. It connects centralized baseband processors (DUs) to remote radio units (RUs). By transmitting only essential data over standard Ethernet networks, eCPRI helps maintain the timing integrity of the transmitted data. Therefore, it solves the bandwidth and flexibility challenges of traditional 4G/CPRI systems.
About the AMD Embedded Computing Summit (ECS)
The AMD Embedded Computing Summit (ECS) Global Technical Tour is the premier in-person technical event series from AMD. It brings together engineers, architects, and technology leaders. These professionals are building the next generation of embedded systems.
ECS goes beyond product overviews, diving deep into design tradeoffs, performance optimization, system architecture, and practical techniques you can apply immediately to active projects. Whether you're closing timing, optimizing DSP pipelines, migrating platforms, or deploying AI at the edge, ECS provides the technical depth and expert access needed to move your designs forward.
AMD Embedded Computing Summit (Jun 16)
Being an Elite Member of the AMD Partner Program, NAT is participating in the AMD Embedding Computing Summit (ECS) event in London UK on June 16th, 2026.
At ECS London, 2026, NAT will for the first time demonstrate its new eCPRI IP core for AMD Zynq™ Ultrascale+ SoC FPGAs. This will be part of a live demo based NAT's high-performance adaptive and scalable Software Defined Radio (SDR).
The NAT eCPRI core has been developed as part of NAT's involvement in several Open RAN (O-RAN) light tower programs. These programs utilize NAT's open standard solutions for RUs, i.e. the NAT-SDR-FLEX-M.
In case you cannot make it to our booth during the event, please reach out to us and schedule your personal online appointment with either Niklas Laufkoetter or Heiko Koerte.
We are looking forward to seeing you on-site at the AMD Embedding Computing Summit event in London.
About eCPRI (Enhanced Common Public Radio Interface)
eCPRI (Enhanced Common Public Radio Interface) is a packet-based fronthaul communication protocol used in 5G and Open RAN (O-RAN) networks. It connects centralized baseband processors (DUs) to remote radio units (RUs). By transmitting only essential data over standard Ethernet networks, eCPRI helps maintain the timing integrity of the transmitted data. Therefore, it solves the bandwidth and flexibility challenges of traditional 4G/CPRI systems.
About the AMD Embedded Computing Summit (ECS)
The AMD Embedded Computing Summit (ECS) Global Technical Tour is the premier in-person technical event series from AMD. It brings together engineers, architects, and technology leaders. These professionals are building the next generation of embedded systems.
ECS goes beyond product overviews, diving deep into design tradeoffs, performance optimization, system architecture, and practical techniques you can apply immediately to active projects. Whether you're closing timing, optimizing DSP pipelines, migrating platforms, or deploying AI at the edge, ECS provides the technical depth and expert access needed to move your designs forward.
DESY MicroTCA Workshop 2025 (Dec 2-4)
The 14th MicroTCA Workshop for Industry and Research will again take place at the CFEL building on DESY premises from December 2nd to December 4th, 2025.
As a member of the advisory committee, exhibitor, vendor and participant N.A.T. cordially invites you to participate (please follow this link to register) in the MicroTCA Workshop, either on-site at DESY or virtually through the workshop's streaming portal.
The annual MicroTCA Workshop for Industry and Research is the one of the most important events on MicroTCA and targets both users and vendors from international industry and research facilities around the globe.
The main topics of this year's MicroTCA Workshop are:
- Applications in research facilities
- Applications in industry
- New products
- New Technologies
- Future of standard and interoperability
- Software and firmware
- Industry Exhibition - presentation of modules and systems from industry and research
At the 14th MicroTCA Workshop for Industry and Research N.A.T. will present on the following topics
- MicroTCA Tutorial "MicroTCA Management" by Heiko Koerte (Dec 2nd, 09:35 - 10:00)
- "New building blocks and uplink solutions with the NAT-MCH" by Heiko Koerte (Dec 2nd, 17:00 - 17:15)
- "An “industrial server” made of MicroTCA building blocks (& something else)" by Herbert Erd (Dec 3rd, 09:30 - 09:45)
In case you cannot make it to our booth during the daily conference times, please reach out to us and schedule your personal online appointment with either Herbert Erd, Oliver Muenchhoff or Heiko Koerte.
We are looking forward to welcoming and meeting you on-site at DESY.
DESY MicroTCA Workshop 2023 (Dec 5-7)
The 12th MicroTCA Workshop for Industry and Research will again take place at the CFEL building on DESY premises from December 5th to December 7th 2023.
As a member of the advisory committee, exhibitor, vendor and participant N.A.T. cordially invites you to participate (please follow this link to register) in the MicroTCA Workshop, either on-site at DESY or virtually through the workshop's streaming portal.
The annual MicroTCA Workshop for Industry and Research is the one of the most important events on MicroTCA and targets both users and vendors from international industry and research facilities around the globe.
The main topics of this year's MicroTCA Workshop are:
- Applications in research facilities
- Applications in industry
- New products
- New Technologies
- Future of standard and interoperability
- Software and firmware
- Industry Exhibition - presentation of modules and systems from industry and research
At the 12th MicroTCA Workshop for Industry and Research N.A.T. will present on the following topics
- MicroTCA Tutorial: "MicroTCA Management, Clocking and Fabrics" by Heiko Koerte (Dec 5th, 9:35 - 10:00am CET)
- "NAT-MCH Generation 4 - new features and how to transit from NAT-MCH Generation 3" by Heiko Koerte (date and time to be confirmed)
- "NATIVE-server: from concept to solution" by Herbert Erd (date and time to be confirmed)
In case you cannot make it to our booth during the daily conference times, please reach out to us to schedule your personal online appointment with either Herbert Erd or Heiko Koerte.
We are looking forward to welcoming and meeting you on-site at DESY.
DESY MicroTCA Workshop 2022 (Dec 6-8)
The 11th MTCA workshop for industry and research will take place on DESY premises as a physical event from December 6th to December 8th 2022.
As a member of the advisory committee, exhibitor, vendor and participant N.A.T. cordially invites you to participate (please follow this link to register).
The main topics of the workshop are:
- Applications in research facilities
- Applications in industry
- New products
- New Technologies
- Future of standard and interoperability
- Software and firmware
- Industry Exhibition - presentation of modules and systems from industry and research
N.A.T. will give presentations on the following topics (list to be updated as soon as abstracts are confirmed):
- MicroTCA Tutorial: MicroTCA Management (Dec 6th, 10:30an CET - 11:00am CET)
- New AMCs
- New MCHs
In case you cannot make it to our booth during the daily conference times, please reach out to us to schedule your personal online appointment with either Herbert Erd or Heiko Koerte.
We are looking forward to welcoming and meeting you on-site at DESY.