

- Single-width, full-size form factor
- Dual -48VDC input
- Up to 860W/1300W management and payload power for up to 12 AMCs, 2 CUs, and 2 MCHs
- 12V @ 6.6A max. (80W) / 3.3V @ 180mA max.
- Support of N+1 and 2+2 redundancy
NAT-PM-DC48
Superior DC/DC Power Module for high-power demanding MTCA systems
- Single-width, full-size form factor
- Dual -48VDC input
- Up to 860W/1300W management and payload power for up to 12 AMCs, 2 CUs, and 2 MCHs
- 12V @ 6.6A max. (80W) / 3.3V @ 180mA max.
- Support of N+1 and 2+2 redundancy
Description
The NAT-PM-DC48 is a hot swappable, fully redundant, and highly efficient DC/DC Power Module in single full-size form factor, and thus ideally suited for all air cooled ATCA and MTCA applications.
Input power from two -48VDC sources is converted to 16 independent 12V channels for payload power and 3.3V for management power, supporting up to 12 AMCs, 2 Cooling Units, and 2 MCHs. Both inputs offer features such as input protection, input isolation, inrush control, input OR-ing, EMI filtering, holdup circuit, and high efficiency conversion.
Due to its superior DC/DC conversion unit, the NAT-PM-DC48 can provide a maximum output power of up to 1300W. With this output power, the NAT-PM-DC48 is the first commercially available MTCA power module being able to supply a MTCA system under worst case conditions with power, using only a single power-module:
As an ordering option, also a version providing a maximum of 860W is available.
Furthermore, a 12V output filtering stage has been implemented into the design, offering a 12V ripple voltage below 10mVpp (0-20MHz Bandwidth, peak-to-peak), making this module a good choice for noise sensitive applications.
The NAT-PM-DC48 supplies backup power for other Power Modules (Shared Management Power, SMP) in the system, and includes an Enhanced MMC (EMMC) supporting an Intelligent Platform Management Bus (IPMB) to enable communication with the Carrier Manager.
The Optical Load Indicator continuously displays the level of power utilization of the whole system.
Key Features
- Single, full-size form factor
- 16 channels of payload and management power
- Hot-swappable, fully redundant
- Total power distribution of up to 860W/1300W (ordering option)
- 6% conversion efficiency at full power (min.)
- 2% conversion efficiency at half power (min.)
- Output over-voltage and short-circuit protection
- Input under-voltage shutdown
- Over-temperature protection
3.3V output power subsystem
- Max channel current: 180mA
- Fast trip current limit: 300mA
- Accuracy 3.3V: +5%/-0%
- Max ripple at 180mA: <20mV
12V output power subsystem
- Max power / channel: 80W / 6.6A at 12V
- Fast trip current limit: 8.3A
- Max inrush current: 19.4 A
- Accuracy 12V: +2%/-2%
- Max ripple at 6.6A: <10mV
Front Panel Connectivity
- Dual -48V Power Input A/B
- Optical Load Indicator
- Status / Fault / Hot-Swap LEDs
Related Products
Order Codes
NAT-PM-DC48-[Option]
1300-0.1SF | full size MTCA DC Power Supply with dual -48V IN and 16*12V/3,3V OUTPUT1300W single-width, full-size MTCA.1 compliant with retention screws |
860-0.0SF |
full size MTCA DC Power Supply |
860-0.1SF |
full size MTCA DC Power Supply |
1300-0.0SF |
full size MTCA DC Power Supply |
Solutions / Applications
MTCA applications with higher power demands