Background image
NAT-PM-AC600
NAT-PM-AC600
High-density and high-efficiency AC/DC Power Module
  • Single-width, full-size form factor
  • 110-265VAC input (auto range) with self-locking power cord
  • 600W management and payload power for up to 12 AMCs, 2 CUs, and 2 MCHs
  • 12V @ 6.6A max. (80W) / 3.3V @ 180mA max.
  • Support of N+1 and 2+2 redundancy

NAT-PM-AC600

High-density and high-efficiency AC/DC Power Module

  • Single-width, full-size form factor
  • 110-265VAC input (auto range) with self-locking power cord
  • 600W management and payload power for up to 12 AMCs, 2 CUs, and 2 MCHs
  • 12V @ 6.6A max. (80W) / 3.3V @ 180mA max.
  • Support of N+1 and 2+2 redundancy

Description

The NAT-PM-AC600 is a high-density and high-efficiency AC/DC Power Module for MTCA applications. It is hot-swappable, fully redundant, and fully compatible with any standard compliant FRU insertable into a MTCA chassis.

The NAT-PM-AC600 provides up to 600W output power for a total of 16 power channels. This is sufficient for the expected workload of 12 AMCs, 2 CUs, and 2 MCHs with 12V @ 6.6A max. and 3.3V @ 180mA max.

Additionally, it supports backup power for up to three other Power Modules in the MTCA system (shared management power – SMP).

A robust Enhanced Module Management Controller (EMMC) interfaces the power control functionality via the Intelligent Platform Management Bus (IPMB) to the MCH.

Via LEDs at the front panel, the module monitors its total power load in real time. Moreover, it owns indication LEDs for hot-swap, failure, and heartbeat.

Key Features

  • Single-width, full-size form factor
  • 110-265VAC input with self-locking power cord
  • 600W output power
  • support of N+1 and 2+2 redundancy
  • 16 power channels
  • support of 12 AMCs, 2 CUs, 2 MCHs
  • individual control of management and payload power
  • individual current sensors
  • 92% conversion efficiency (TBC)
  • full HPM support for field upgrades of firmware
  • output over-voltage and over-temperature protection
  • input under-voltage shutdown
  • output short circuit protection
  • IEC/EN/UL60950-1 safety standard compliant
  • programmable current limiting threshold per output channel

3.3V output power subsystem

  • channel current: 180mA
  • fast trip current limit: 300mA
  • accuracy 3.3V: 5%

12V output power subsystem

  • channel current: 6.6A (80W)
  • fast trip current limit: 8.3A
  • inrish current: 19.4A
  • accuracy 12V: 10%

Related Products

Order Codes

NAT-PM-AC600[Option]

MicroTCA AC Power Module 600WAC single full-size – without power cable
+ACCAB-AUS/CHN  

MicroTCA AC Power Module 600WAC single full-size with 6ft AC power cord with safety lock mechanism – AUS/CHN version

+ACCAB-EU  

MicroTCA AC Power Module 600WAC single full-size with 6ft AC power cord with safety lock mechanism – version for most European countries

+ACCAB-IL  

MicroTCA AC Power Module 600WAC single full-size with 6ft AC power cord with safety lock mechanism – Israelian version

+ACCAB-UK  

MicroTCA AC Power Module 600WAC single full-size with 6ft AC power cord with safety lock mechanism – UK version

+ACCAB-US  

MicroTCA AC Power Module 600WAC single full-size with 6ft AC power cord with safety lock mechanism – US version

Solutions / Applications

MTCA applications with average power demands