AMC Processing Boards
Our range of versatile AMC processing boards are designed to meet the exact requirements regarding flexibility, efficiency and processing power for MicroTCA and ATCA based applications.
Based on processors from NXP®, Intel®, ARM® and user programmable logic resources by FPGAs from AMD® (Xilinx®) and Intel® (Altera®) our products provide compute resources for appliances from embedded and industrial up to top edge communication.
Not shown on this page are our custom and bespoke designs we have created to fulfill special demands of our customers. These include both hardware and firmware designs as well as IP core developments for FPGA based products. Please contact us in case you are invested in this kind of service.
Products
NAMC-8569-CPU
- NXP Freescale PowerQUICC III MPC8569 processor
- Lattice ECP3 FPGA
- 2x GbE, USB/RS232, and optional user defined I/O towards front panel
- 2x GbE, SRIO, and PCIe towards backplane
- TDM and iTDM support
NAMC-8569-8E1/T1
- NXP Freescale PowerQUICC III MPC8569 processor
- e500 PowerPC
- DS26518 framer for 8x E1/T1 line interfaces via RJ45 towards front panel
- 2x GbE, SRIO, and PCIe towards backplane
- TDM and iTDM support
NAMC-ARRIA10-FMC
- Choice of Intel ARRIA 10 GX or SX SoC
- Dual-core ARM Cortex A9
- Single High Pin Count FMC slot, VITA 57.1 compliant
- Access to FMC front panel interfaces
- Wide range of backplane interconnects
NAMC-ODSP-M
- Xilinx Kintex-7 FPGA with iTDM-to-TDM controller
- Up to eight 24-core Octasic OCT2224M DSPs
- Onboard managed Ethernet switch
- 2x GbE and 2x XAUI towards the backplane
- Including Octasic’s Vocallo media gateway software
NAMC-QorIQ-P204x
- Freescale QorIQ P2040/P2041 quad-core packet processor
- Lattice ECP3-17 FPGA
- 2x GbE and USB/RS232 towards front panel
- 2x GbE, 2x SATA, combination of XAUI (P2041 only), SRIO, and PCIe Gen2 towards backplane
NAMC-QorIQ-P4080
- Freescale QorIQ P4080 eight-core packet processor
- Lattice ECP3-17 FPGA
- Real time clock for RTP/PTP support and PLL
- XAUI via SFP+, 2x GbE, and USB towards front panel
- 2x GbE, 2x SATA, combination of XAUI, SRIO, and PCIe Gen2 towards backplane
NAT-AMC-SDH
- Xilinx Kintex-7 FPGA with optional interfaces, e.g. SDH, TSI, iTDM, HDLC, etc.
- Add/Drop Multiplexer PMC TEMUX336
- Four SFP connectors for 4x OC-3/STM-1 or 2x OC-12/STM-4 SFP transceivers towards front panel
- 4x GbE, XAUI or SRIO (optional), ESSI towards backplane
- iTDM via Gigabit Ethernet
NAT-AMC-TCK7
- Xilinx Kintex-7 FPGA
- Xilinx Coolrunner-II CLPD
- 8x 10 Gbps SFP+ interfaces towards the front panel
- Low-latency communication links to backplane and to RTM
- Clock distribution circuit with a broad range of reference frequencies for high-speed serial interfaces
NAT-AMC-COMex
- Supports Type 6 and Type 7 COMex modules
- M.2 PCIe x4 Interface for storage
- Onboard Intel i350 Ethernet Controller with multiple interfaces
- 1G (COMex Type 6) or 1G/10G (COMex Type 7) towards front panel (via SFP) and backplane
- Graphical interface via DDI at the front panel (COMex Type 6 only)
NAT-AMC-ZYNQUP-ECAT
- Xilinx ZynqUP MPSoC with integrated ARM Cortex-A53/-R5 cores and programmable logic
- Scalable number of EtherCAT slaves in MTCA
- 1x SFP as GPIO of FPGA (LVDS or single-ended I/O) at front panel
- 8x 100Mbit Ethernet via RJ45 to EtherCAT network at front panel
- GbE, PCIe x1, and TCLKA-D towards the backplane
NAT-AMC-ZYNQUP-FMC
- Quad-core ARM Cortex-A53 (application processing unit)
- Dual-core ARM Cortex-R5 (real-time processing unit)
- Single High Pin Count FMC slot, VITA 57.1 compliant
- Access to FMC front panel interfaces
- Wide range of backplane interconnects
NAT-AMC-ZYNQUP-SDR
- Combination of NAT-AMC-ZYNQUP-FMC carrier and 1x or 2x NAT-FMC-SDR mezzanines
- Up to 4x Analog Devices ADRV9009 dual RF transmitters, receivers, and observation receivers
- Xilinx ZynqUP+ FPGA SoC with quad-core ARM Cortex-53 and dual-core Cortex-R5
- Various customizable memory options and numerous interfaces towards front panel and backplane
- Development platform in ready-to-deploy package with optional housing